Skip to Content
  1. All products
  2. AUTOMATIC CYLINDERS
  3. BURG-WÄCHTER ZS 80 CAM LOCK
  4. AUTOMATIC CYLINDERS
Pricelist: 00. Publieke prijslijst Pricelist
Pricelist: 00. Publieke prijslijst Pricelist

BURG-WÄCHTER ZS 80 CAM LOCK

11.93 EUR 11.93

14.44 € 14.44 €

11.93 € 11.93 € excl. VAT

Stock: 0 Units
Location(s): None found

  • Outer diameter Ø (mm)
  • Inner diameter Ø (mm)
  • Distance of flat sides (mm)
  • Distance from housing to lip (mm)
  • Type of closure
Add to cart
Add to wishlist
Contact Us
Outer diameter Ø (mm): Ø 20
Inner diameter Ø (mm): Ø 16.4
Distance of flat sides (mm): 13.4
Distance from housing to lip (mm): 8
Type of closure: Keyed different (KD)
Article Number: ZS 80
Barcode: 4003482012802

UNIVERSAL CYLINDER ZS77 WITH THREE BOLTS

The universal cylinder ZS 80 is made of high-strength and additionally nickel-plated die-cast zinc. The cylinder can be used in many areas.Opening and closing the disc cylinder is particularly easy with the aid of one of the two reversible keys supplied. The bolt can be adjusted at a 90-degree angle. The universal cylinder ZS 80 is designed for a material thickness of 1-2 mm. 

THE RIGHT CYLINDER FOR YOUR APPLICATION

The cylinder ZS 80 with practical clamp spring is equipped with three different bolts as standard. So you have the right solution for your individual application. During installation, make sure that the key remains in the lock until after installation is complete. 

1. Technical data sheet for letterbox cylinder ZS 80 from BURG-WÄCHTER: 

It is very important to maintain your lock properly, especially if it is exposed to the elements of nature a lot. Dirt and corrosion can build up, especially during cold and inclement weather. Therefore, we recommend lubricating your door lock at least twice a year or ideally at every seasonal change. 
To make sure your lock runs smoothly again, we recommend using lubricants such asWD-40 WHITE LITHIUM SPRAY GREASE. The correct use of these oils is essential.

​In general, there are two solutions for lock maintenance: prevention/protection and troubleshooting. 

If a lock is difficult to open, it could be due to two reasons: 
​
​1. The key and lock are not yet properly matched, this is common with a new lock

​​2. There is dirt build-up or rust in the lock

In these cases, we recommend using WD-40 WHITE LITHIUM SPRAY GREASE to solve the problem. This will prevent rust from forming in the lock. However, it is important that you apply the oil in the right place in the lock so that the WD-40 gets to the moving parts to ensure proper lubrication.